你好,欢迎来到济南济柴环能燃气发电设备湖南快乐十分官方网站!

焦化发电机组厂家提醒大家注意调压器的使用

来源:http://zuiai9.com   发布于:2019-08-06

  为了保护发电机组能够正常发电,焦化发电机组厂家提醒大家使用调压器时要注意以下几点需要注意。

  In order to protect the normal power generation of the generator set, the coking generator set manufacturer reminds us to pay attention to the following points when using the voltage regulator.

  1。 所有的输出开关应该在启动前断开。

  1. All output switches should be disconnected before starting.

  2。 将转速提高到额定转速,并将端子电压提高到额定电压,观察其稳定性。如果正常,打开电源并发送电力。加负荷后,原动机转速可能发生变化,频率低于额定频率时,可将原动机转速再次调整到额定频率。

  2. Increase the speed to the rated speed and the terminal voltage to the rated voltage to observe its stability. If normal, turn on the power supply and send the power. After loading, the speed of the prime mover may change. When the frequency is lower than the rated frequency, the speed of the prime mover can be adjusted to the rated frequency again.

焦化发电机组

  3.发电机停车前,应切断负荷,停止空载停车。

  3. Before the generator stops, the load should be cut off and no-load stopping should be stopped.

  4. 三相发电机组需要注意三相负荷或电流平衡,避免单相负荷运行或严重不平衡负荷使用,对发电机组或调压器造成损坏。

  4. Three-phase generators need to pay attention to three-phase load or current balance, so as to avoid single-phase load operation or serious unbalanced load use, causing damage to generators or regulators.

  以上是焦化发电机组厂家为您介绍稳压器使用的一些注意事项,可供您在实际操作中参考。想要了解更多内容,欢迎访问网站:http://zuiai9.com

  Above are some precautions for coking generator unit manufacturers to introduce the use of voltage regulators for your reference in practical operation.


上一篇:燃气发电机组应注意积碳清洗
下一篇:燃气发电机组对机房及燃气管道有哪些要求?

安徽11选5 湖北快3 上海11选5 江西快3 安徽11选5 河南11选5 福建11选5 安徽11选5 上海11选5 江西11选5